Serva BluePower 3000 Electrophoresis Power Supply

BluePower™ 3000 HPE Power Supply delivers 3000 V, 200 mA, 300 W  for electrophoresis applications like isoelectric focusing (IEF), 2D gel electrophoresis (2DE). It comes with a special mode for low current applications such as IEF: the power supply can measure currents as low as 10 microAmps and keep it's voltage constant at even 0 current.

Other applications like SDS PAGE and submarine electrophoresis can be performed as well with it's programmable 4 outlets.

All SERVA BluePower™ power supplies are easy-to-use, safe and reliable. They are fully overload-protected including short-circuit of outputs: an automatic power off function stops the voltage when ground leakage is detected. 

The power supply features:

• Automatic cross-over function - Each model has constant voltage, constant current and constant power capabilities with automatic cross-over and shows which parameter is kept constant.

• Programmable power supplies - User-defined editing of programs is done quickly. 9 programs with each up to 9 steps can be stored. Once a set has been made, the parameters can be changed during the run, without interrupting it.

• Data logging, data transfer and remote control - All BluePower power supplies have a continuous logging combined with a real time clock. Data can be sent via USB interface to visualize and examine the stored run details. The power supply can be controlled by your computer via remote control function.

• Timer Function - The timer function enables you to run your gels at a constant time, while the Vh (volt hour) integrator gives you maximum reproducibility of difficult runs.

• Voltage Ramp Mode - A linear voltage gradient for any step provided the limiting current current or power is not attained.